OnePlus 6 has been a big part of the rumor mill in the last few weeks, and now a new render of the smartphone has been leaked. Notably, the latest leak suggests some of the design elements that have already been tipped for the upcoming flagship from OnePlus.
We have a series of press render images published by the CompareRaja as always in collaboration with the OnLeaks. The render realized starting from the CAD files, allow to adequately synthesize the design aspects of the new flagship.
The front is characterized by reduced frames and the notch visible in the upper part; at the rear the dual camera lens with vertical orientation stands out and enclosed in an element that protrudes slightly from the body, just below is the dual LED flash and even lower the fingerprint sensor and the company logo.
The edges of the back cover appear blunt and end in the frame that runs along the perimeter of the device – it should be made of metal. On the right edge, the Alert Slider is visible and the power button; the opposite edge exclusively houses the volume rocker. Along the bottom edge, there is the 3.5 mm headphone jack, the small microphone hole, the USB-C port and the speaker grille.
The site also published a video of the OnePlus 6 press renders that allows a further look at the body:
According to the source, the smartphone should measure 155.7 x 75.35 x 7.75 mm and weigh 175 grams. The remaining technical features (obtained from previous rumors and official confirmations) include: 6.28-inch AMOLED display with 2280 x 1080 pixel resolution in 19:9 format, Snapdragon 845 SoC, 8GB of RAM, 128GB / 256GB of native storage, 20MP + 16MP dual rear camera, 16MP front camera, and 3300mAh battery with Dash Charge 2.0 fast charge support. The device launch is scheduled for May 16th.